Hyper 2000

Dimensions (L×W×H): 350 x 202 x 78mm,

Weight (excluding accessories): approximately 8.5kg

Yes. According to Section 12 of the German Value Added Tax Act (UStG), you do not need to pay VAT when purchasing Hyper 2000.

For a better shopping experience, we recommend visiting our German websiteto enjoy tax-free prices on your orders.

Hyper 2000's 1800W MPPT and 1200W AC bidirectional inverter capabilities, in conjunction with intelligent power management features, can help you reduce costs in two ways:
During the day, Hyper converts the energy generated by the solar panels into AC power for the home, and the excess energy (which you can configure in the Zendure app or by using a compatible smart energy meter) will be used to charge the battery. At night, Hyper 2000 will convert the power stored in the battery into AC for home use. This reduces the waste of surplus solar power, helping you get the greatest cost benefit out of your system.
Additionally, using time-of-use (TOU) energy scheduling, a Hyper 2000 system cuts electricity costs by charging the battery when prices are low and using the battery's energy when prices are high.

Hyper 2000 has 4 sets of solar connectors and can connect with up to 4 groups of solar panels.

1. We recommended that the maximum power range for each MPPT input be between 350W and 600W.
2. Please note that the Voc (open circuit voltage) on each MPPT input must be lower than 55V.

Yes. The recommended power range for each MPPT input is 350W-600W. with a voltage range of 15V-55V. Please be aware that solar panels with voltages above 55V may cause permanent damage to Hyper 2000.

Hyper 2000 works with Zendure's AB1000 and AB2000 batteries. AB1000 has a capacity of 960Wh, and AB2000 has a capacity of 1920Wh. AB2000 can operate in temperatures as low as -20°C, while AB1000 is suitable only for environments above 0°C. If outdoor winter temperatures fall below 0°C, we recommend using only AB2000 or placing your system indoors where the temperature is above 0°C.

AB1000 and AB2000 can be freely combined in a stack of four batteries, with a maximum total capacity of 7680Wh.

Yes, Hyper 2000 can charge your batteries using your home's AC power. It can be scheduled to do so during off-peak hours to reduce costs, and will also atomatically charge from AC power when the batteries are low and there is insufficient solar power, preventing battery damage and ensuring that you have some reserve energy available.

Yes, Hyper 2000 is equipped with intelligent anti-discharge technology.
For the longevity and performance of your batteries, Hyper 2000 takes particular measures when the batteries are almost depleted. Hyper 2000 will use AC and/or solar power to keep the batteries at 5%. If AC and solar power are not available, Hyper 2000 will go into sleep mode to reduce discharge.

ZenLink is a local communication technology that offers key benefits over alternatives.
1. As soon as multiple Hyper 2000s are plugged into the home power grid, they instantly recognize each other and begin communicating, establishing a stable and reliable connection without relying on Wi-Fi.
2. Phase recognition: With this technology, it is unnecessary for an electrician to distinguish whether multiple Hyper devices are on the same phase. If they are on the same phase, they can automatically cluster and be controlled uniformly, saving a great deal of time and cost.

You can adjust the AC output power in the Zendure App.
- When the solar panel generation is higher than the AC output power you set, Hyper 2000 will store the excess in the battery.
- When the solar panel generation is lower than the AC output power you set, all of the solar panel generation will be delivered to your home, and the battery will be discharged to meet the designated AC output power.
- At night, when there is no solar panel generation, Hyper 2000 will use the battery to power your home.

AC Output power can be automatically adjusted using compatible smart plugs and smart enery meters. Hyper 2000 supports Shelly Pro 3EM, Shelly 3EM, Zendure Satellite Monitor CT, Zendure Satellite Plug, and Shelly Plus Plug S.

Yes, a slight increase in temperature during use is normal. This will not affect the device's lifespan. Hyper 2000 has undergone rigorous testing and is equipped with anti-overheating protection to ensure the safety of your system. Children and pets should not be allowed to touch Hyper 2000 while it is in operation.

For safety reasons, Hyper 2000 will stop supplying power to the household when a power outage occurs. We are soon to launch a unique backup power strip that integrates with Hyper 2000 to provide electricity in an emergency.

Yes, if the power of each of your solar panels is small (100W-350W), you can connect 2-3 panels in parallel on a single set of Hyper 2000's solar connectors. Please make sure that the open circuit voltage (Voc) of each solar panel is between 15-55V and multiple panels are in parallel.

Hyper 2000 supports three types of communication protocols for reliability and convenience:
1. Wi-Fi 2.4GHz & 5GH: You can choose the most stable band to connect Hyper 2000 to the internet.
2. Bluetooth local communication; when there is no Wi-Fi signal, you can still control and monitor Hyper 2000 with the Zendure app if you are within Bluetooth range.
3. ZenLink: Multiple Hyper 2000 stacks will automatically recognize and coordinate with each other when they are connected to your home's outlets, without relying on Wi-Fi.